Dengfeng Color Printing Co.,Ltd.
Learn about the production procedures and production points of stand up pouches
Release time:
2024-12-25
Preparation: install the transverse heat sealing knife, the bottom heat sealing knife, the reinforced heat sealing knife, and install the punching device.
First, the production procedures
1. Preparation: install the transverse heat sealing knife, the bottom heat sealing knife, the reinforced heat sealing knife, and install the punching device.
2. Wear the film, set the EPC, and align the bag edge and pattern.
3. Adjust the bottom heat sealing knife, enter the length and size, the position direction of the knife should be level, use the upper knife as the reference to adjust the knife, and check whether the round hole is round. Set up the photoelectric sensor.
4. Install the bottom film and adjust it to the middle fold. Bottom adjustment membrane perforation.
5. Adjust the transverse heat sealing, so that the position of the heat sealing knife and the printing position are aligned.
6. Adjust and strengthen the heat sealing block, and make up the pressure at the intersection of the four layers.
7. Adjust the cutter and edge material cutting device.
8. Confirm and adjust the bottom punching position and bottom heat sealing position. Confirm and adjust the position of the transverse heat sealing knife and the reinforced heat sealing block. Confirm the heat sealing strength and adjust the heat sealing temperature.
Second, the key points of production
1. The tension of the bottom membrane should not be too high. If the tension is too high, the round hole on the bottom surface will be deformed. The general tension is 0.05~0.2MPa.
2. One group of heat sealing knives has higher pressure and lower temperature, and the second and third groups use normal temperature and pressure.
3. The spring pressure of the reinforced heat sealing block is adjusted to zero, and only the self-weight of the heat sealing device is functional.
4. Silicone plates are generally made with a hardness of 50°, and a plate of 70° is used when the ironing area is small.
5. When heat sealing, the round hole on the bottom surface is called oval, which can increase the waiting time by 100min.
6. The bag making speed is generally 50~100 pieces/min.
Through the understanding of the above stand-up pouch editor, I hope it can be helpful to you.
Key words:
Previous Page
Previous Page:
Related News
Learn about the production procedures and production points of stand up pouches
Preparation: install the transverse heat sealing knife, the bottom heat sealing knife, the reinforced heat sealing knife, and install the punching device.
2024-12-25
Precautions for the production process of high-temperature retort pouches
The commonly used high-temperature retort pouch substrates are PET, NY, AL, RCPP, etc. The corona treatment effect of these substrates directly affects the composite strength
2024-12-25
Parafilm customization process and matters
PP parafilm is widely used in product packaging and sealing in food, cosmetics, daily necessities and other industries
2024-12-25
Tea packaging strategy: design points from the inside out
The design of tea packaging is not only about appearance, but also about the quality and preservation of tea.
2024-12-25
The global savory snacks market is expected to grow from $94.5 billion in 2015 to $138.2 billion in 2020 (GlobalData, 2016), and the definition of snacks is changing due to consumer health concerns.
2024-12-25
netac
Need Help? Let Us Know
* We will contact you within one working day. Please pay attention to your email.
Erice Chen
Address: No. 9 Xingye Road, Fengqi Village, Anbu Town, Chao'an District, Chaozhou City, Guangdong Province, China
Copyright © 2024 Chaozhou Chaoan Dengfeng Color Printing Co.,Ltd.